Follett 7CI100A Installation, Operation And Service Manual page 20

Service
(continued)
7. Install compression nozzle:
 Remove and inspect compression nozzle O-ring seal.
Replace if damaged in any way.
 Clean O-ring groove. Lubricate O-ring with Petro-gel and
reinstall.
 Install compression nozzle (Fig. 26.1).
 Install compression nozzle retainer (Fig. 26.2).
 Install M6 socket head allen screw (Fig. 26.3).
8. Install transport tube (Fig. 27.1).
9. Tighten hose clamp (Fig. 27.2).
10. Install gear motor:
 Install main housing insulation (Fig. 28.1).
 Slide gear motor onto auger shaft (Fig. 28.2).
 Install two M6x90 allen screws (Fig. 28.3).
20 Dispenser and Ice machine 7CI100A/7FS100A
–––––––––––––––––––––––––––––––––––––––––––––––––––
Fig. 26
3
2
Fig. 27
1
Fig. 28
3
2
3
1
2
1