Recording In The Long Play Mode-Lp Rec; Recording Blank Segment-Rec Mute; Monitoring The Recording - Sony Walkman TCD-D100 Operating Instructions Manual

Digital audio tape-corder walkman dat
Hide thumbs Also See for Walkman TCD-D100:
Table of Contents

Advertisement

Available languages

Available languages

Notes
• A tape recorded in the
LP mode cannot be
played back on a DAT
deck which is not
equipped with the LP
mode function.
• A loud noise may be
heard during the
transition from the SP
mode to the LP mode
when a tape containing
a recording that has
been switched from the
SP mode to the LP
mode halfway is
played back on a DAT
deck which is not
equipped with the LP
mode function. In this
case, turn down the
volume or stop
playback.
Tip
To insert a blank segment
of 4 seconds or more,
press the P PAUSE
button while pressing the
r REC button, and then
hold down only the
P PAUSE button for 4
seconds or longer. When
the blank segment
exceeds four seconds,
"P" indicator will flash
quikly. The tape-corder
re-enters the pause mode
when the P PAUSE
button is released.
Recording in the Long Play mode—LP
REC
Set the SP•LP switch to LP to record twice the
recording time of conventional DAT cassettes.
Accordingly, a 60-minute DAT cassette recorded in
the LP mode enables recording of 120 minutes.
Tape counter display during LP mode
The absolute time and the remaining time of the tape
are based on the SP mode. Therefore, the actual time is
twice the amount of the value shown on the display.
Recording blank segments—REC
MUTE
A blank segment can be inserted at the beginning of
the track and between tracks. In this case, the Start ID
is not written.
1
Press the r REC button and the P PAUSE button
to enter the recording pause mode.
2
Press the P PAUSE button while pressing the
r REC button.
A four-second blank segment is inserted and the
unit returns to the recording pause mode
automatically.

Monitoring the recording

Use the headphones or speakers of the stereo unit to
monitor the sound while recording.
1
Plug the headphones to the REMOTE/2 jack or
the stereo unit to the LINE OUT jack of the tape-
corder.
2
Begin recording.
The actual time during LP
mode is 4 and half
minutes.
25
EN
Recording

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents