Power On; Rf Pairing - Panasonic SA-PT660 Technical Manual

Wireless Information – RF Pairing / Matching T & R

RF Pairing

1. Proximity – Bring the wireless receiver to the transmitter.
2. Power ON – Plug the transmitter card in. Turn everything on
and press the selector button for DVD mode. (Do not plug
the card in with the unit on. A damaged card will get hot.)
3. Setup – While the W1 / W2 icon is blinking in the unit's
display, hold down the front panel FF button and the
remote's "3" Button.
4. Indicators – a) W1 / W2 will blink on the main unit's display
if the transmitter card is inserted. b) "P" icon will be
displayed when the pairing process is started.
5. Mating – While the "P" is present, press the rear receiver
recessed "ID Set" button.
6. Indicator – The W1 / W2 will stop blinking proving an RF
match has been made.
7. Audio Test – Repeatedly press the remote's SOUND button until the
panel displays "S.Music". Then press the
Music". The rear speakers will have the same music as the front L & R.
8. W1 / W2 still blinking? – Use the troubleshooting info in the next pages.
Slide # 10
arrow button to turn ON "S.
2. Transmitter card
5. ID Set button
ID
Set
7. Rear Audio Test
1. H. Bass
2. R.C. FCS
3. SRD Enh(ance)
4. S.Music
3. Press
panel FF &
3 buttons
On
Outline Models:
Wireless SA-PT660
Mech SA-PT760
Pwr Supply SA-PT960
Protection SA-PT1060
Audio SH-FX67, 85