Selecting The Sound Enhancement (E.a.m.); Selecting The Sound Enhancement - Toshiba SD-2800 Owner's Manual

Advanced playback
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
DVD

Selecting the sound enhancement

VCD
CD
1
Press E.A.M.
E.A.M.
The sound enhancement menu
appears.
2
Select the sound enhancement by
pressing E.A.M. or / .
Each time you press the button, the sound
enhancement changes.
Normal:
Normal sound.
3D:
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue:
To control dynamic range to make
dialogue more intelligible (only when
playing a DVD video disc recorded on
the Dolby Digital recording system).
• To use this enhancement on sounds
output from the BITSTREAM/PCM
jack, be sure to set "Audio Out
Select" to "PCM."
40
To exit the audio enhancement selection
Press ENTER.
Notes
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Pro Logic Surround, select "Normal".
Otherwise, Dolby Pro Logic Surround may function
differently than usual.
• Selecting "Dialogue" disables "Dynamic Range Control"
function
Spatializer
Products. Inc.
Certain audio features of this product manufactured under a license
from Desper Products, Inc., Spatializer
device are trademarks owned by Desper Products, Inc.
50
Alternatively leave the DVD video
player unattended for about 5
ENTER
seconds after having made a
selection.
.
50
®
3-Dimensional Sound Processing provided by Desper
® and the circle-in-square
2
ENTER
1, 2