Selecting The Sound Enhancement (E.a.m.); Selecting The Sound Enhancement - Toshiba SD-770SR Owner's Manual

Advanced playback
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode

Selecting the sound enhancement

1 Press E.A.M.
The sound enhancement will appear:
Press the E.A.M. button again, the sound
enhancement change to Off.
3D*:
To obtain expansive virtual surround sound effects
from two speakers.
To use this enhancement on sounds output from
the ANALOG AUDIO OUT jacks, be sure to set
"Digital Output" to "PCM".
* Effective in playback of a DVD video disc or a
VIDEO CD.
40
To exit the audio enhancement selection
Leave the DVD video player unattended for about a few
seconds after having made a selection.
Notes
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Surround Pro Logic, select "3D Effects
On". Otherwise, Dolby Surround Pro Logic may function
differently than usual.
E.A.M.