Restore Defaults; Demos - Polycom SpectraLink 8020 Administrator's Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Restore Defaults

Demos

44
Error Handling Mode
The mode determines how the handset will behave
Error Handling
when an error occurs. The
to stop operating if an error message is received. Unless the error is a
fatal one, normal operation may be resumed by power-cycling the
handset. The
Restart on Error
every effort to reboot quietly and quickly to standby mode. In either
scenario, a call in progress will be lost. Restart On Error should be used
unless specific error conditions are being investigated.
Error detail may be shown on the display, captured by the syslog
server and may also be available for downloading with the Handset
Administration Tool. An error memory dump can be taken and sent
to Customer Service for escalation and analysis.
The Restore Defaults option will set all user and administrative
parameters except Telephony Protocol to their factory defaults.
The option starts a demonstration of the handset's OAI
Graphics Demo
graphical capabilities immediately upon selection.
option will cause the handset
Halt on Error
option will cause the handset to make
PN: 1725-36038-001-H.doc