Sanyo DS24424 Service Manual page 4

INITIAL BUS DATA SETUP (Cont.)
18. Select NO. 67 VMD6VMG3SSN (VM Delay / VM Gain / Sync Sep Sens) with
keys for 22.
19. Select NO. 69 EWD (E/W DC) with
20. Select NO. 6A EWA (E/W Amp) with
21. Select NO. 6B EWT (E/W Tilt) with
22. Select NO. 6C ECB4ECT (E/W Corner Btm / E/W Corner Top) with
23. Select NO. 83 OPT (Aspect Ratio / Surround) with
24. Select NO. 84 OP2 (Component / V Guide) with
25. Select NO. 86 CBR (RF C Bypass) with
26. Select NO. 8C CBT (RF C BPF Test) with
27. Select NO. 8D HR (H Display Position) with
28. Select NO. 8E SBO (Sub Bright Offset) with
29. Select NO. 98 DRY (YUV R-Y Difference) with
30. Select NO. 99 DBY (YUV B-Y Difference) with
31. Select NO. A1 EEA (16:9 E/W Amp Difference) with
32. Select NO. A7 EVB (16:9 V Blk Sw) with
33. Press the MENU key to turn off the Service Menu display.
SERVICE ADJUSTMENTS (Cont.)
or key. Adjust the data with + or – key for 2A.
or key. Adjust the data with + or – key for 16.
or key. Adjust the data with + or – key for 29.
or
or key. Adjust the data with + or – key for 00.
or key. Adjust the data with + or – key for 08.
or
or
or
or
or key. Adjust the data with + or – key for 60.
or key. Adjust the data with number keys for 54.
or key. Adjust the data with + or – key for A0.
key. Adjust the data with + or – key for 20.
key. Adjust the data with + or – key for 24.
key. Adjust the data with + or – key for 05.
key. Adjust the data with + or – key for 0B.
key. Adjust the data with + or – key for 10.
or key. Adjust the data with + or – key for F6.
— 4 —
or key. Adjust the data with number