Connecting the Display
Using the Computer
1.
Slide up the Sliding Door and tilt the monitor backward for easily connecting
the cables.
2.
Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
3.
Connect the power cord into a proper power outlet that is easily accessible and
close to the display.
Sliding Door
PUSH
Analog signal
* Varies according to model.
Wall-outlet type
PC-outlet type
PC
MAC
*
*
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
A5
PUSH
2
1