Replacing The Lamp - InFocus X6 Reference Manual

Warning

Replacing the lamp

The projector will detect the lamp life itself. It will show

you a warning message
Only InFocus lamps are tested with this projector. Use of

other lamps may cause electrical shock and fire.
Be extremely careful when removing the lamp housing. In

the unlikely event that the bulb ruptures, small glass frag-
ments may be generated. The lamp housing is designed
to contain these fragments, but use caution when remov-
ing the lamp housing. Before replacing the lamp, clean
the lamp compartment and dispose of cleaning materials.
Wash hands after lamp replacement.
Hg - Lamp contains mercury. Manage in accordance with

local disposal laws. See www.lamprecycle.org.
When you see this message, change the lamp as soon as

possible. Make sure the projector has been cooled down for
at least 60 minutes before changing the lamp.
Appendices
 ... English