Appendices; Troubleshooting - InFocus X6 Reference Manual

Appendices

English ... 28

Troubleshooting

If you experience trouble with the projector, refer to the fol-
lowing information. If the problem persists, please contact
your local dealer or service center.
Problem: No image appears on screen
E nsure all the cables and power connections are correctly and

securely connected as described in the "Operation" section.
Ensure the pins of connectors are not crooked or broken.

C heck if the projection lamp has been securely installed. Please

refer to the "Replacing the lamp" section.
M ake sure you have removed the lens cap and the projector is

switched on.
Problem: Partial, scrolling or incorrectly displayed image
Press "Re-Sync" on the remote control.

If you are using a PC:

For Windows 3.x:
1. I n the Windows Program Manager, double click the "Windows
Setup" icon in the Main group.
2. V erify that your display resolution setting is less than or equal
to 1280 x 1024.
For Windows 95, 98, 2000, XP:
1. F rom the "My Computer" icon, open the "Control Panel" folder,
and double click the "Display" icon.
2. Select the "Settings" tab
3. Click on the "Advanced Properties" .
I f the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.