InFocus X6 Reference Manual page 20

Frequence
" Frequence" changes the display data frequency to match the fre-
quency of your computer's graphic card. If you experience a vertical
flickering bar, use this function to make an adjustment.
Tracking
S ynchronize the signal timing of the projector with the graphics
card. If you experience an unstable or flickering image, use this
function to correct it.
White Peaking
U se the white peaking control to set the white peaking level of
DMD chip. 0 stands for minimal peaking, and 10 stands for maxi-
mum peaking. If you prefer a stronger image, adjust towards the
maximum setting. For a smooth and more natural image, adjust
towards the minimum setting.
Color Temp.
A djust the color temperature. At higher temperature, the screen
looks colder; at lower temperature, the screen looks warmer.
Degamma
T his allows you to choose a degamma table that has been fine-tuned
to bring out the best image quality for the input.
User Controls
 ... English