Polaris 2002 Snowmobile Owner's Manual page 55

Rear Suspension Adjustments
Rear Torsion Spring Adjustment - Xtra-12
To adjust rear torsion spring tension,
rotate the two-position cam using the
engine spark plug tool.
1a - Soft Tension - long end of cam to
front
1b - Medium Tension - short end of cam
up
Different rate torsion springs are available
if greater tension is desired. Contact your
dealer for more information.
Rear Torque Arm Adjustment - SKS Models
On SKS models only, the rear torque arm may be lowered from the
stock mounting position (A) to an optional position beneath the tunnel
bend line (B).
Install a replacement bolt into the stock mounting position to secure
the rear suspension mounting pad to the tunnel. See your dealer for
more information.
Moving the rear torque arm below the tunnel will improve deep snow
mobility.
THE PERFECT FIT
A
B
1a
1b
53