42) Press down also from the bottom end of the
CHASSIS to lock the remaining clips.
44) Tighten these three TORX + size 6 screws to the
torque of 13 Ncm in the order shown.
46) Turn over the DISPLAY. Be careful not to damage
the flex!
28
43) Use the SS-93 to connect the MAIN FLEX
connector. Be careful not to damage the connector!
45) Remove the adhesive protective film from the
CHASSIS.
47) Press the DISPLAY gently down into its place.
Confidential | Copyright © 2010 Nokia | All rights reserved
Nokia C7-00
RM-675
Service Manual Level 1&2
Version 2.0