Nokia C7-00 Service Manual page 13

7) Slide the SRT-6 to direction shown to release the
A-COVER CHIN clips.
9) Use the sharp end of the SS-93 to release the
KEYMAT.
11) Unscrew the two TORX+ size 6 screws in the
order shown. Do not use them again. Discard them.
13
8) Remove the A-COVER CHIN by pulling it into
direction shown.
10) Remove the KEYMAT.
12) Release the A-COVER by sliding it very gently to
the direction shown.
Confidential | Copyright © 2010 Nokia | All rights reserved
Nokia C7-00
RM-675
Service Manual Level 1&2
Version 2.0