Table of Contents
Advertisement
indicates that Check Control messages have
been stored. These Check Control messages
can be viewed again later, refer to page 85.
Text messages
Text messages at the upper edge of the Control
Display explain the meaning of the displayed
indicator and warning lamps.
Supplemental text messages
You can call up more information on the Control
Display, e.g. on the cause of a malfunction and
on how to respond, via Check Control.
The text of urgent messages is displayed auto-
matically.
To exit the display:
Select "OK" and press the Controller.
Symbols
Depending on the Check Control message, you
can select from among the following functions
in the supplementary text messages.
>
"Service request"
Contact your BMW center.
>
"Roadside Assistance"
Contact BMW Roadside Assistance.
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Controls overview
Hiding Check Control messages
Press the button on the turn signal/high beam
lever.
>
Some Check Control messages are dis-
played continuously and remain visible until
the malfunction has been rectified. If several
malfunctions occur at once, the messages
are displayed consecutively.
These messages can be hidden for approx.
8 seconds. After this, they are displayed
again automatically.
They are marked with the symbol
shown here.
>
Other Check Control messages are hidden
automatically after approx. 20 seconds.
They are stored and can be displayed again
later.
They are marked with the symbol
shown here.
Displaying stored Check Control
messages
1.
Push button 1 in the turn signal/high beam
lever up or down repeatedly until the appro-
priate symbol appears in the display,
accompanied by the words "CHECK".
Controls
85
Advertisement
Table of Contents
