Table of Contents
Advertisement
1
Roadside parking lamp and tail lamp LED
2
Inner brake lamp
3
Outer brake lamp
4
Reflector
5
Lateral reflector
6
Turn signal
7
Backup lamp
8
Brake Force Display lamp
Replacing tail lamps
Outer brake lamp
The outer brake lamp can be accessed through
a single socket.
The figure shows the right side of the vehicle.
1.
Remove the cover from the panel of the
trunk.
2.
Turn the bulb holder to the left, see arrow,
and remove it.
3.
Apply gentle pressure to the bulb while
turning it to the left for removal and
replacement.
Online Edition for Part no. 01402911223 - © 06/13 BMW AG
Replacing components
4.
Attach the bulb holder and turn it all the way
in the opposite direction.
5.
Reattach the cover.
With Xenon headlamps, the parking/tail
lamp uses LED technology. After replac-
ing the bulb, ensure that the bulb holder is prop-
erly seated; otherwise, the roadside parking
lamp/tail lamp may not
Inner brake lamp, turn signal, backup
lamp and Brake Force Display lamp
The bulbs are integrated in a single bulb holder.
1.
Remove the cover from the panel of the
trunk.
2.
Detach the bulb holder by pressing
together the clips, see arrows, and remove
it.
3.
Brake lamps and turn signal: apply gentle
pressure to the bulb while turning it to the
left for removal and replacement.
4.
Backup lamp: pull the bulb out of the socket
and replace it.
5.
Attach the bulb holder and let it snap into
place.
6.
Reattach the cover.
License plate lamps, center brake
lamp, and parking/tail lamp
These lamps use LED technology for operation.
If they malfunction, please contact your BMW
center.
Mobility
work.<
247
Advertisement
Table of Contents
