How To Reset Of Playback Time; How To Initialize The Cd Player - Marantz CD5004 Service Manual

HOW TO THE RESET OF PLAYBACK TIME
When replacing CD MECHANISM (TRAVERSE), please reset Playback time (total) in the following procedure.
(1) P rocedure 6 of SERVICE MODE, Playback time (total) is displayed.
The display is a time unit. (Example: "10050 hours, 0 minute, 1 second " is 10051h)
The maximum Playback time is 65536h.
(2) P ress 2 Button 3 seconds and more.
PTime Clear? is displayed.
(3) P ress 1 Button.
Done is displayed after PTime:00000h is displayed.
Play back time (total) was reset.
Press the <ON / STANDBY> button to quit Service Mode.
HOW TO INITIALIZE THE CD PLYAER
Initialize the CD player when μcom, peripheral parts of μcom, or MAIN P.W.B. unit has been replaced in servicing.
※ A ll user setting will be lost and its factory setting will be restored when this initialization is made. Be sure to memorize
your setting for restoring again after the initialization.
(1) I nsert mains cable plug in the outlet. (The Unit is standby mode.)
(2) P ress 2 and the <ON / STANDBY> Buttons simultaneously 4 seconds and more.
EEPROM Clear is displayed after No Disc is displayed.
The microprocessor initialized to factory setting.
EEPROM Clear
PTime : 00051h
PTime Clear?
Done PTime : 00000h
No Disc
16