Advertisement
Before you begin,
Verify that the following items came with your DSL kit:
1
2
3
4
5
Your service provider may include an Ethernet adapter, a line filter, and a wall-mount
filter in your DSL kit. If you received any of these items, follow the instructions
provided in this guide for basic installation. If you need further assistance installing
these items, please contact your service provider.
A
PCI Ethernet adapter
B
Line filter(s)
C
Wall-mount filter
A
2
1
SpeedStream
Device
®
2
Documentation
3
Software Manual CD-ROM
(Router model only)
4
Power supply
5
RJ-45 Straight-through
Ethernet cable
6
RJ-11 DSL cable
6
B
C
Step 1
>
Install Line Filters
Stand-alone Line Filter
1
2
3
Wall-mount Filter
1
2
Devices such as fax machines, caller
ID boxes, or phones that share
the same phone line as your DSL
account require a line filter, which
prevents noise from disrupting the
DSL signal on the phone line. Filters
can be in the form of a stand-alone
line filter or a wall-mount filter.
Stand-alone Line Filter
For each device that shares the
DSL phone line:
1. Unplug the device's cord from
the phone jack.
2. Plug the filter into the
phone jack.
3. Plug the phone cord (or other
device cord) into the filter.
Wall-mount Filter
For a wall-mount phone, install a
wall-mount filter.
3
1. Remove the phone.
2. Connect the wall-mount filter
to the wall plate.
3. Reconnect the phone.
3
Advertisement
