Harman Kardon AVR 3600 Service Manual page 13

7 x 80w 7.1 channel a/v receiver
Hide thumbs Also See for AVR 3600:
Table of Contents

Advertisement

harman/kardon
AVR3600
MAIN REMOTE CONTROL FUNCTIONS
MAIN REMOTE CONTROL FUNCTIONS
Menu Button:
This button is used within the Now Playing
menu for the tuner (including SIRIUS Radio), and The Bridge III, and
to display the main menu on some source devices. To display the
AVR 3600's main menu, press the Setup Button.
Disc Menu:
While a DVD is playing, press the DVD Source
Selector, then this button, to display the disc's menu.
Soft Keys:
These buttons are used with some source devices.
See Table A13 in the appendix for details. They are also used with
a Teletext-capable television if your broadcast, cable or satellite
provider offers Teletext service.
Channel/Page Control:
When the tuner has been selected,
this control selects a preset radio station. While operating a cable,
satellite or HDTV set-top box or a television, press these buttons to
change channels.
Record Button:
Use this button to make recordings when an
audio or video recorder is in use.
Setup Button:
Press to display the AVR's Main Menu, or to
switch the remote to AVR device mode.
Info Settings Button:
Press to display the AVR's Info
Menu, which contains the settings for the current source.
Source Settings Button:
Press a Source Selector and
then this button to display a source device's settings menu.
Zone Selector:
Use this switch to select whether AVR
commands will affect the main listening area (Zone 1) or the remote
zone of a multizone system (Zone 2). For normal operation, leave
the switch in the Zone 1 position.
Track Skip:
These buttons are used with source components
to change tracks or chapters.
Transport Controls:
These buttons are used to control
source components and The Bridge III.
Light:
Press to illuminate the buttons on the remote. Press it
again to turn the backlight off, or wait 10 seconds after the last
button press for the light to turn off on its own.
Learn:
The AVR 3600 remote is capable of "learning" individual
IR codes from the original remote that came with a source device.
See page 26 in the Installation section.
14
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr 2600

Table of Contents