JVC KS-FX845R Service Manual page 7

2.1.9 Removing the front board
(See Figs.10 to 12)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) Remove the four screws L attaching the rear cover on the
back side of the front panel assembly. (See Fig.10.)
(2) Release the ten joints g, the front panel assembly and rear
cover become separate. (See Fig.11.)
(3) Remove the front board from the front panel assembly.
(See Fig.12.)
L
Fig.10
Joints g
Joint g
Rear cover
Fig.11
Front board
Fig.12
L
L
Rear cover
Front panel assembly
Joint g
Joints g
Front panel assembly
(No.49873)1-7