JVC KS-FX845R Service Manual page 4

2.1 Main body
2.1.1 Removing the front panel assembly
(See Fig.1)
• Press the release button and remove the front panel assembly.
2.1.2 Removing the bottom cover
(See Fig.2)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) Turn the main body upside down.
(2) Insert a screwdriver under the joints to release the two
joints a on the left side, two joints b on the right side and
joint c on the back side of the main body, then remove the
bottom cover from the main body.
CAUTION:
When releasing the joints using a screwdriver, do not damage
the main board.
2.1.3 Removing the front chassis assembly
(See Figs.3 and 4)
• Prior to performing the following procedures, remove the front
panel assembly and bottom cover.
(1) Remove the two screws A on the both sides of the main
body. (See Fig.3.)
(2) Remove the two screws B on the front side of the main
body. (See Fig.4.)
(3) Release the two joints d and two joints e on the both sides
of the main body, then remove the front chassis assembly
toward the front. (See Fig.3.)
1-4 (No.49873)
SECTION 2
Disassembly method
Release button
Joint a
Joint a
Joint d
Joint d
Front panel assembly
Fig.1
Bottom cover
Joint c
Fig.3
A
A
Front chassis assembly
Fig.3
Front chassis assembly
B
Fig.4
Joint b
Joint b
Joint e
Joint e