Setting the AUX Camera Signal Input
When the AUX camera is connected, the video input signal type can be
chosen.
Further setting item: Camera Signal
Setting contents: NTSC (Initial setting) / PAL
NTSC/PAL:
Choose the video input signal type manually.
Setting the Camera Interrupt
Even when the unit is powered off, the monitor will display the rear
view behind the vehicle when the gear lever is shifted to the reverse
position.
Setting item: Interrupt (PowerOFF)
Setting contents: On (Initial setting) / Off
• Rear camera can only be operated to display the rear view.
• When the gear lever is shifted out of reverse, the unit turns off.
34
-EN
AUX Setting
Touch [AUX] on the Application setup menu in step 3. Refer to
"Application Setup Operation" (page 32).
Setting the AUX Mode
Setting item: AUX In
Setting contents: Off / On (Initial setting)
Off:
AUX source is not displayed.
On:
AUX source is displayed.
• After selecting "On" in the "AUX In" setting, touch [AUX In], the
following further items can be adjusted.
• A camera and auxiliary device cannot be connected to the ICS-X7 at
the same time. If "On" is set, "AUX Camera" (page 33) will be set to
"Off. "
Setting the Primary AUX Name
Setting item: Primary Name
Setting contents: AUX1(Initial setting) / DVD / GAME / EXT.DVD /
DVD-CHG. / DVB-T / TV / USB Player
• When a DVB-T tuner or USB Player (sold separately) is connected,
you can use it to connect one more External Input device. Setting the
Secondary name can change the mode name display of this device.
Setting the Secondary AUX Name
Secondary name can be set only when Primary name is set to "DVB-T"
or "USB Player."
Setting item: Secondary Name
Setting contents: OFF (Initial setting) / AUX2 / DVD / GAME /
EXT.DVD / DVD-CHG. / DVB-T*
2
Player*
• The selected source name is displayed instead of AUX mode name.
1
*
If the Primary Name is DVB-T, DVB-T is not displayed as a
Secondary Name option.
2
*
If the Primary Name is USB Player, USB Player is not displayed as a
Secondary Name option.
Setting Direct Touch Operation
If DVB-T is set as the Primary Name or Secondary Name, this setting is
available.
Setting item: Direct Touch
Setting contents: ON (Initial setting) / OFF
ON:
Direct Touch operation is available on the DVB-T screen.
OFF: Direct Touch operation is not available on the DVB-T
screen.
Switching the Visual Input Signal System
After setting to "On" in "Setting the AUX Mode," this setting can be
carried out. The video input type can be changed.
Setting item: Signal
Setting contents: Auto (Initial setting) / NTSC / PAL
Auto:
The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL:
Choose the video input signal type manually.
1
/ TV / USB