Viera Link "Hdavi Control" Setting; Adjusting The Time Lag Between Audio And Video By Delaying Audio Output; Switching Between Dual Sounds; Clear Audio At Low Volume - Panasonic SC-ZT1 Operating Instructions Manual

VIERA Link "HDAVI Control"
setting
When you do not wish to use VIERA Link "HDAVI Control"
( ➜ page 20), you can set the unlinked operation by selecting
"OFF ".
The normal setting is "ON " (Linked operation).
1. Press and hold [–SETUP, OFF] for about
2 seconds.
The setting items are displayed. ( ➜ page 23)
2. Press [w][q] to select "HDMI " and press
[OK].
3. Press [w][q] to select "CTRL " and press
[OK].
4. Press [e][r] to select "ON " or "OFF "
and press [OK].
ON : When the operation is linked
OFF : When the operation is not linked
Factory setting: ON
5. Press [ RETURN] several times to select
"EXIT " and press [OK] to fi nish the
setting.
Adjusting the time lag between
audio and video by delaying
audio output
You can reduce audio and video time lag by adjusting sound
delay.
1. Press and hold [–SETUP, OFF] for about
2 seconds.
The setting items are displayed. (➜ page 23)
2. Press [w][q] to select "SOUND DLY " and
press [OK].
3. Press [e][r] to select the setting and
press [OK].
AUTO, OFF, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160,
180, 200
Factory setting: AUTO
4. Press [ RETURN] several times to select
"EXIT " and press [OK] to fi nish the
setting.
Note
• If delaying audio output is not necessary, select "OFF ".
• "AUTO " is effective only when connecting the Panasonic TV
(VIERA) supporting HDAVI Control 3 and later versions. (Auto
Lip Synchronization Function)
• When you connect the Panasonic TV incompatible with
HDAVI Control 3 and later versions or non-Panasonic TV, if
"AUTO " is set, "40 " (msec) is set.

Switching between dual sounds

You can switch between dual sounds of Dolby Digital signals.
1. Press and hold [–SETUP, OFF] for about
2 seconds.
The setting items are displayed. ( ➜ page 23)
2. Press [w][q] to select "DUAL PRG " and
press [OK].
3. Press [e][r] to select the audio and press
[OK].
M1 : Main audio M2 : Sub channel audio output
M1+M2 : Main + Sub channel audio output
Factory setting : M1
4. Press [ RETURN] several times to select
"EXIT " and press [OK] to fi nish the
setting.

Clear audio at low volume

Dynamic range compression function for Dolby Digital.
It compresses the dynamic range so that you can still hear
dialogue and leave the sound fi eld unaffected.
Use this function when you have to turn the volume down, such
as late at night.
1. Press and hold [–SETUP,OFF] for about
2 seconds.
The setting items are displayed. ( ➜ page 23)
2. Press [w][q] to select "DRCOMP " and
press [OK].
3. Press [e][r] to select the setting and
press [OK].
OFF : Normal playback
STANDARD : The best suited playback for each audio
source
MAX : Always compressed at the maximum level
Factory setting : OFF
4. Press [ RETURN] several times to select
"EXIT " and press [OK] to fi nish the
setting.

Switching the attenuator

Switch the attenuator "ON " when big sounds become distorted
while playing an analogue input source.
1. Press and hold [–SETUP, OFF] for about
2 seconds.
The setting items are displayed. (➜ page 23)
2. Press [w][q] to select "ATTENUATOR "
and press [OK].
3. Press [e][r] to select "ON " and press
[OK].
ON, OFF
Factory setting : OFF
4. Press [ RETURN] several times to select
"EXIT " and press [OK] to fi nish the
setting.
25
RQT9472