Wireless Coverage Indicators - Blackberry Curve 9220 User Manual

User Guide
Depending on your wireless service provider, you might not be able to change the connection speed for the wireless
network.
1. On the Home screen, click the Manage Connections icon.
2. Click Networks and Connections > Mobile Network.
3. Change the Network Mode field.
4. Press the key > Close.
Related information
I can't connect to the mobile network,
Turn on flashing LED notification for wireless coverage
1. On the home screen or in a folder, click the Options icon.
2. Click Display > Screen Display.
3. Select the LED Coverage Indicator checkbox.
4. Press the key > Save.
When your BlackBerry smartphone is connected to the wireless network, the LED light flashes green.
After you finish: To turn off the wireless coverage notification, clear the LED Coverage Indicator checkbox.

Wireless coverage indicators

Indicators in the upper-right corner of the home screen display the wireless coverage level for the area that you are using
your BlackBerry smartphone in. For more information about wireless coverage areas, contact your wireless service
provider.
Indicator
3G , 4G , H+
NXTL, MIKE, or NTWK
280
Description
Provides information about the strength of the wireless signal. Three or more
bars indicate a strong signal. A reduced signal display might indicate increased
power output from your smartphone as it attempts to connect to a weak signal.
, EDGE, GPRS, You're connected to a mobile network and you can access features such as
email messaging and Internet browsing. If you don't see one of the indicators,
you might be in an area of reduced wireless coverage where some features
aren't available (you might only be able to make a phone call or send and
receive text messages).
You can call only emergency numbers.
You're in an area of no wireless coverage.
Manage Connections
279