Using The Hook & Loop Fasteners - Targus Ergo D-ProNotebook Stand User Manual

Using the Hook & Loop Fasteners
1 Remove the plastic covering from the four hook and loops
at (G). With the front of the notebook resting on (B),
carefully and firmly push the docking station/port replicator
onto the PRM and hold for at least 20 seconds.
2 The docking station/port replicator is now attached to the
PRM and the notebook screen should be positioned at the
center of the D-Pro.
Your notebook workstation is ready for use.
NOTE: the position of the docking station/port
replicator can be adjusted to suit smaller or larger
notebooks by adjusting the height of the PRM using
the two knobs at (H).
Targus Ergo D-Pro Notebook Stand
B
12
H