Without Targus Port Replicator ..6 With Targus Port Replicator ..7 Connecting a Security Cable ..8 Port Replicator Module .
Page 3
Notebook Stand. The D-Pro is a unique, ergonomically correct desktop notebook stand that allows a notebook computer to be comfortably used as a desktop replacement. The D-Pro provides a compartment for storage of a Targus Port Replicator or hub and cable management for a clean workspace.
Targus Ergo D-Pro Notebook Stand Setting Up The D-Pro 1 Press buttons (A) on both sides to raise the D-Pro to desired angle. 2 Open the document holder and flip it towards you.
Page 5
Targus Ergo D-Pro Notebook Stand 3 Check that the D-Pro is assembled correctly and carefully place your notebook on the stand as shown. 4 Fold the document holder up into place. Adjust the inclination of the document holder by using the shift buttons (B).
Targus Ergo D-Pro Notebook Stand Cable Management Without Targus Port Replicator 1 Remove compartment cover (A). 2 Guide cables through indicated reinstall compartment cover.
Targus Ergo D-Pro Notebook Stand With Targus Port Replicator 1 Remove compartment cover (A). 2 Place the replicator in the cavity. 3 Guide cables through (B) and connect them to the replicator. 4 Connect your notebook and power supply at (C).
Targus Ergo D-Pro Notebook Stand Connecting a Security Cable The D-Pro offers two options for securing your notebook and peripherials; a slot lock or video port lock . Follow the usage instructions included with your security cable. Slot lock Video port lock...
Targus Ergo D-Pro Notebook Stand Port Replicator Module (Optional) The Port Replicator Module (PRM) allows you to mount your OEM docking station or port replicator to the D-Pro. Attention IBM & Toshiba Users Your docking station/port replicator may be positioned and attached to the PRM with the screw rivets that are provided.
Targus Ergo D-Pro Notebook Stand 2 Connect your notebook first to your docking station/port replicator and place them together onto the D-Pro, making sure your notebook is supported at (B) and centered. 3 Use the knobs to position the PRM after determining the proper position to attach the docking station/port replicator according to the outlining instructions below.
Page 11
Targus Ergo D-Pro Notebook Stand Toshiba Advanced port replicator ll and lll: Line up the top of your port replicator with the indication lines on the PRM at (F). Port Replicator Module (PRM) The position where the docking station/port replicator is to be attached to the PRM is now determined.
Targus Ergo D-Pro Notebook Stand Using the Hook & Loop Fasteners 1 Remove the plastic covering from the four hook and loops at (G). With the front of the notebook resting on (B), carefully and firmly push the docking station/port replicator onto the PRM and hold for at least 20 seconds.
Targus Ergo D-Pro Notebook Stand Ergonomic Guidelines The following guidelines will help you to create a comfortable and ergonomic working environment. 1 Adjust the armrest of your chair such that it is level with the height of the table or keyboard. In this position, your shoulders should be relaxed;...
(if applicable). Warranty Targus warrants this product to be free from defects in materials and workmanship for one year. If your Targus accessory is found to be defective within that time, we will promptly repair or replace it. This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss.