Chronometer Sub Mode; How To Use The Chronometer - Suunto Observer Instruction Manual

Suunto watch
Hide thumbs Also See for Observer:
Table of Contents

Advertisement

field and the date shows the month first then the day.
Once you determine the year, month and day, the Observer will supply the day of the week in
the top field.
Setup mode will automatically be released if left idle for more than one minute.
The dual time will stay the same, even though the time in the main time mode is adjusted. For
example, if you set the dual time to show your home time, your home time will always be
displayed in the sub mode even if you travel to a different time zone and adjust the time in the
main time mode.
The dual time function is completely independent from the current time and does not effect
the alarms or the memory functions. These are dependent on the current local time in the
main time mode.

2.2 CHRONOMETER SUB MODE

In the TIME mode, press the [SELECT] button once to enter this sub mode.
The Observer chronometer feature:
Can record 1-99 split and lap times; and
Obtain a maximum range of one run (timing event) up to 24:00:00. Upon exceeding this
range the Observer will activate an audible sound indicating the timing process has
stopped.
In the chronometer mode, the fields display the following data as shown in Fig. 2.2:
a) Seconds and tenths of a second;
b) Hours and minutes;
c) Icon of a "stopwatch"; and
d) Current time.

2.2.1 How to Use the Chronometer

In the chronometer mode:
1. Press the [ON OFF] button to start the chronometer.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents