After Every Operation - Kärcher HDS Super M Eco Operating Instructions Manual

Operating Instructions
! Fully open water delivery control at the
handgun, in the + direction to the stop.
See Figure 9 (B)
! Set operating pressure to minimum
value. See Fig. 10
! Set the temperature regulator (item 24)
to min. 100°C
Danger: Steam!
Danger of scalding!
We recommend the following cleaning
temperatures
— Preservative removal, extremely greasy
dirt 100-110°C
— Thawing of aggregates, certain facade
cleaning operations up to 140°C

After every operation

Warning!
Danger of scalding with hot water.
After operating it with hot water or steam
the unit must be cooled for at least two
minutes by operating it with cold water and
its open handgun.
Following operation with cleaning agent
! Set cleaning agent metering valve
(item 30) to "0"
! Set unit switch (item 23) to "I"
! Actuate handgun and flush unit for
approx. 1 min
Stopping machine
! Set unit switch (item 23) to "0"
! Shut off water supply
! Switch the pump briefly on with the unit
switch (item 23) (approx. 5 sec.)
! Remove mains plug from socket ONLY
with dry hands
! Remove water connection
! Actuate handgun to depressurise unit
! Put on safety of handgun Figure 9 (A)
! Engage spray lance in cover holder
! Reel up the high-pressure hose and
electric cables and attach them to
fastenings
Note!
Take care not to kink high-pressure hose
and cable!
Note!
Frost will destroy unit if water is not drained
off completely!
! Store unit in a frost-free location
Observe the following if the unit is
connected to a flue:
Danger of damage caused by cold air
entering through the flue. Disconnect unit
from flue at outside temperatures below
0°C.
Immobilise unit if frost-proof storage is not
possible.
English
31