Table of Contents
Advertisement
Initial switch-on: Software will be installed
If the PC is connected to a network, the network protocol is required as well as the user and server
details. Contact your network administrator if you have any questions about these settings.
When you switch on your PC for the first time, the supplied software is installed and configured. You
should plan some time for this, as this process must not be interrupted.
Once the installation has been started the PC must not be switched off!
!
During installation the PC may only be rebooted when you are requested to do so!
Otherwise the installation will not be performed correctly. If a fault occurs during the
installation, the contents of the hard disk must be completely restored.
You may require the Windows licence number during installation. This number is located on a
sticker on your PC.
A26361-K675-Z120-1-7619, edition 3
Preparing for use
13
Advertisement
Table of Contents
