►
Press the board into the slot so that it engages.
►
Fold the retaining bracket down again in the direction of the arrow (2). Ensure that the retaining
bracket engages.
►
Install the board bracket as described in "Installing board bracket" section.
►
Close the casing (see "Closing the casing" chapter).
Removing the graphiks card
►
Open the casing (see "Opening the casing" chapter).
►
Remove the board bracket as described in "Removing board bracket" section.
►
Press sideways against the retaining bracket and fold it up in the direction of the arrow (1).
►
Press against the ledge of the slot (2) to release the graphics card from the slot.
►
Pull the graphics card out of the slot in the direction of the arrow (3).
A26361-K675-Z120-1-7619, edition 3
System expansions
41