HP 200 Series Services And Applications page 306

Frame Relay Network Design: Fleet Call, Inc.
Performance
Performance
As of mid-1993, Fleet Call continues to roll out the network to remote sites.
Performance will depend on the bandwidth of the remote links. Fleet Call is
closely monitoring the utilization of the network and can add bandwidth to
the frame relay backbone link as required. The WAN carriers also offer
specialized reporting to provide a detailed view of circuit utilization.
Issues
Fleet Call employed the services of HP Network Consultants in the design
and initial rollout of the network. However, as with any network implementa-
tion, unanticipated issues surfaced. When implementing a new network,
remember the following:
1. When planning a frame relay network, make sure the network
equipment has been completely certified by the circuit provider. This
will aid in troubleshooting and support.
2. When purchasing newly released equipment, plan the rollout of the
equipment after suitable testing has been performed.
3. Never underestimate the time and effort required to bring up a new
WAN link.
4. In remote-site installations, perform site walkthroughs to determine
any unforeseen obstacles that may delay or impair installation of the
network components.
5. Plan ahead and purchase early. You never know when network
equipment lead times suddenly will be longer than needed.
6. Keep everyone informed. Develop a mutually agreed-upon schedule
of implementation tasks and responsibilities. Set expectations
correctly.
3-112