HP 200 Series Services And Applications page 135

Fields Operator
Destination =
Address
Source =
Address
Port =
Number
Fields Operator
Destination =
Address
Source =
Address
Figure 13. Sample IP Filters
IP Filter Lists Filter lists (while not required) may facilitate the
configuration of filters if you wish the filter to apply to non-contiguous
value ranges. A list specifies the filter values within a filter rule. The
elements of a list are a name to identify the list and one or more pairs of
numbers that specify a range. When a filter specifies a list name, packets
are checked against the range(s) of values specified by the list. Two
types of lists are defined for the two types of packet filters:
IP address lists specify ranges of IP network addresses. Specify the
lower and upper boundary of each IP address range to be in the list
(or just the lower address for a single value).
IP port lists specify ranges of TCP/UDP port numbers. Specify the
lower and upper boundary of each port range to be part of the list
(or just the lower port number for a single value).
Internet Protocol Routing Service
Values
192.32.165
128.16.4.100
23
Values
192.32.1.65
128.10.10.10
IP Filters
Action
DROP Filter Rule A
Action
DROP Filter Rule B
2-83