Advertisement
To return to Time mode, press and hold the
BACK button.
Care and Maintenance
Keep the cadence sensor clean. Clean it with a
mild soap and water solution, and rinse off with
clean water. Dry it carefully with a soft towel.
Never use alcohol or any abrasive material, such
as steel wool or cleaning chemicals. Do not
immerse the cadence sensor in water.
Your safety is important to us. Check that you
can turn your handlebars normally, and that the
cable wires for brakes or gears do not catch the
sensor. Make sure the sensor does not disturb
pedaling or using the brakes or gears. While
riding your bike, keep your eyes on the road to
prevent possible accidents and injury. Avoid
hard hits as these may damage the sensor.
Cadence sensor battery
Contact your authorized Polar Service Center for
a replacement of cadence sensor. Polar recycles
used sensors. For more information on local
after sales services, consult the Polar Customer
Service Card.
Frequently Asked Questions
What should I do if...
...the cadence reading is 0 or there is no
cadence reading while cycling?
• Start searching for the data again by
pressing and holding the LIGHT button and
selecting Seek sensor.
• Make sure the position and distance of the
cadence sensor to the crank magnet are
appropriate.
• Check that you have activated the cadence
function in the cycling computer. For further
information, see Cadence Sensor Teaching.
E N G L I S H
3
Advertisement
