Usage Of Child Lock; Salt Indicator; Rinse Aid Indicator; Rinse Aid Indicator Setting - Blomberg GSN 9476 A Instruction Manual

You can use the delayed start function
if you are utilizing the economic
electricity tariff.
If you want to change the programme
or functions while the delayed start
function is enabled, then pause the
machine by pressing the Start / Pause
/ Cancel button (2). You will see that
the countdown stops. The delayed start
indicator will start flashing. Select
the new programme and/or add the
functions as described in Programme
Selection and Table of Average
Consumption Values. Resume the
delayed start countdown by pressing
the Start / Pause / Cancel button (2).
If you want to cancel delayed start
countdown while it is in progress,
then press the Start / Pause / Cancel
button (2) for three seconds. Release
the button when
flashing in the display. For a couple
of minutes the machine will fulfill the
necessary operations required for
cancellation. Remaining time indicator
(11) displays "00:00". You may select
and operate a new programme
following the delayed start countdown
cancellation process.
If you want to select a new delayed
start time while the delayed start
countdown is in progress, then pause
the machine by pressing the Start /
Pause / Cancel button (2). Set the
desired time by pressing the Time
Delay Button (8). Start the countdown
for the new time by pressing the Start /
Pause / Cancel button (2) again.

Usage of Child Lock

Press the Child Lock buttons (4) and
(5) simultaneously for three seconds in
symbols (12) start
order to activate the child lock. Child
lock indicator (19) will appear on the
screen. Repeat the same procedure to
disable the child lock. Child lock does
not lock the door of the machine but
it prevents the selected programme
or functions from being changed and
disables the Start / Pause / Cancel
button (2).

Salt Indicator

Please check the salt indicator (18)
on the display to see whether there is
enough softening salt in your machine
or not. You need to refill the powder
dispenser whenever the salt warning
indicator light lights.
WARNING:
If the water hardness level is stored
as (r1), salt indicator will never come
on even if the salt container is empty.
(Adjusting the water hardness level is
explained in Water Softening System
section.)

Rinse Aid Indicator

Check the rinse aid warning display
(14) on the screen to find out if there
is sufficient amount of rinse aid in your
machine. You must refill the rinse aid
container when the rinse aid indicator
comes on.
WARNING:
If the Rinse Aid Indicator is set to
(OFF), rinse aid indicator will never
come on even if the rinse aid container
is empty.

Rinse Aid Indicator Setting

•
When your machine is switched
off, press Half Load (½) button
(5) and then On / Off button (1) to
switch it on.
25 GB