Panasonic Viera TC-L42ET5W Operating Instructions Manual page 41

Update Digital TV channel automatically [Update Channel List] (Digital TV)
You can add new channels, delete removed channels, update channel name and position automatically to the channel list.
Digital TV Update Channel List
Scan CH 7
This will take about 3 minutes.
CH Channel Name Type
Display a notification message [New Channel Message] (Digital TV)
Selects whether to give a notification message when a new Digital TV channel is found.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Select only Primary Channels [Select Primary Channel] (Digital TV) (ISDB-T only)
You can select only Primary Channels when using channel up / down button on the remote control or the TV.
[Primary Channels] / [All Channels]
●
Even if you set to [Primary Channels], you can set [Favourites Edit] (p. 38) and [Channel List] (p. 39) from all channels.
Check Digital TV signal [Signal Condition] (Digital TV)
Selects a channel and checks the Digital TV signal condition.
A good Signal Strength is not an indication of suitable signal for Digital TV reception.
Use the Signal Quality indicator as follows.
● Green bar: Good
● Yellow bar: Poor
●
Red bar: Bad (Check the aerial)
Example:
Digital TV Signal Condition
Channel Name 05.1 TEN Digital
Signal Quality 0
Signal Strength 0
Network Name RiksTV
Parameter [CH32] 562.00 MHz
Auto Tuning using the buttons on the TV
For Auto Tuning, using the buttons on the TV (p. 10)
1
Press the F button repeatedly until [Auto Tuning] appears
2
Access [Auto Tuning]
3
Start [Auto Tuning]
● The channel list is updated while keeping your settings in [Favourites Edit], [Channel
69 List], [Child Lock], etc.
● Depending on the signal condition, the update may not work properly.
Quality
● Selecting OK will perform [Update Channel List].
These bars show the maximum signal value of the selected channel.
10
10
●
To change the channel
●
To return to TV
● Control panel OSD appears when
pressing the control panel button.
41