Panasonic Viera TC-L42ET5W Operating Instructions Manual page 34

Menu
Mode
Bass
Treble
Equaliser
Balance
Surround
Auto Gain Control
Volume Correction
Speaker Distance to
Wall
Audio Preference
34
Item
Selects your favourite sound mode for each input [Music] / [Speech] / [User]
[Music]:
Improves sound quality for watching music videos, etc.
[Speech]:
Improves sound quality for watching news, drama, etc.
●
In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those
settings will be stored for each mode.
[User]:
Adjusts the sounds manually by using the equaliser to suit your favourite sound quality.
● For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and
[Treble]. Select [Equaliser] and adjust the frequency.
[Equaliser] (see below)
Adjusts level to enhance or minimise lower, deeper sound output
Adjusts level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
●
This function is available when [Mode] is set to [User].
●
Select the frequency and change the frequency level by using the cursor button.
● To enhance the bass sound, raise the level of the lower frequency. To enhance the treble
sound, raise the level of the higher frequency.
●
To reset the levels of each frequency to the default settings, select
[Reset to Defaults] by using the cursor button, and then press the OK button.
Adjusts volume level of right and left speakers
Surround sound settings
[Off] / [V-Audio] / [V-Audio Surround] / [V-Audio ProSurround]
[V-Audio]:
Provides a dynamic enhancer of width to simulate improved spatial effects.
[V-Audio Surround]:
Provides a dynamic enhancer of width and depth to simulate improved spatial effects.
[V-Audio ProSurround]:
Provides a more progressive enhancer and reverberation to simulate improved spatial
effects.
Automatically regulates large sound level differences between channels and inputs
[Off] / [On]
Adjusts the volume of individual channel or input mode
Compensates for the low frequency sound due to the distance between the speakers and
the wall [Over 30cm] / [Up to 30cm]
●
If the back space between the TV and wall is over 30 cm, [Over 30cm] is recommended.
●
If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
Selects the initial setting for audio tracks [Auto] / [MPEG]
[Auto]: Automatically selects the audio tracks if programme has more than two tracks. The
priority is given in the following order - Dolby Digital Plus,
HE-AAC, Dolby Digital, MPEG.
[MPEG]: The priority is given to MPEG.
● Dolby Digital Plus and Dolby Digital are the methods of coding digital signals developed
by Dolby Laboratories. Apart from stereo (2ch) audio, these signals can be multi-channel
audio.
●
HE-AAC is a perceptual coding method used to compress digital audio for efficient
storage and transmission.
● MPEG is an audio compression method that compresses audio to the smaller size
without any considerable loss of audio quality.
● Dolby Digital Plus and HE-AAC are the technologies for HD (High definition)
programmes.
●
For Digital TV
Adjustments / Configurations (alternatives)