Panasonic Viera TC-L42ET5W Operating Instructions Manual page 33

Menu Item
3D Settings
Screen Display
Motion Picture Pro
24p Smooth Film
Film Cadence
Detection
16:9 Overscan
H-Size
AV Colour System
Colour Matrix
DVI Input Setting
Reset to Defaults
Adjustments / Configurations (alternatives)
Adjusts and sets to view 3D images (p. 29)
Turns the screen off when you select [Off]
[Off] / [On]
●
The sound is active even if the screen turns off.
● Press any buttons (except Standby) to turn the screen on.
● This function is effective in reducing power consumption when listening to the sound
without watching the TV screen.
Automatically compensates the picture frame rate and removes juddering movements to
make the images smooth [Off] / [Min] / [Mid] / [Max]
●
Depending on the contents, images may be noisy. To prevent the noise, change the
setting.
●
Not valid on PC mode or when [Viewing Mode] is set to [Game]
Automatically compensates the picture frame rate to make the 24p source movie images
smooth [Off] / [Min] / [Mid] / [Max]
● This is available only for 24p signal input and displayed instead of
[Motion Picture Pro].
●
Not valid on PC mode or when [Viewing Mode] is set to [Game]
Improves vertical resolution for movie images [Off] / [On]
●
This function is available for the interlaced signal (except in the mode of PC, VIERA
Connect or when [Viewing Mode] is set to [Game]).
Selects the screen area displaying the image [Off] / [On]
[On]:
Enlarges the image to hide the edge of the image.
[Off]:
Displays the image in the original size.
●
Set to [On] if noise is generated on the edge of the screen.
●
This function is available when aspect is set to [16:9].
● This function can be memorised separately for SD (Standard definition) and HD (High
definition) signals.
● Not valid on PC mode or VIERA Connect
Switches the horizontal display range to reduce noise on the side edge of the image
[H-Size1] / [H-Size2]
●
For TV mode, AV and HDMI input
●
Not valid on 3D mode
●
Selects optional colour system based on video signals in AV mode
[Auto] / [PAL-M] / [PAL-N] / [NTSC]
Selects the suitable colour parameter for SD (Standard definition) or HD (High definition)
signal [SD] / [HD]
● This function is available with 480p or 576p input signal from COMPONENT or HDMI
terminal.
Changes the black level of the image for HDMI input mode with DVI input signal manually
[Normal] / [Full]
●
When the DVI input signal from the external equipment (especially from PC) is displayed,
the black level may not be suitable. In this case, select [Full].
● The black level for HDMI input signal will be adjusted automatically.
● For HDMI input mode with DVI input signal
Press the OK button to reset the current Picture Viewing Mode of the selected input to the
default settings
33