Assembly And Adjustments - DeWalt D28111 Instruction Manual

FIG. 1
C
B
Features (D28112)
ANTI-VIBRATION SIDE HANDLE
The anti-vibration side handle offers added comfort by absorbing the
vibrations caused by the tool.
KEYLESS GUARD
The keyless guard allows for quick adjustment during the application
to enhance application versatility.
DUST EJECTION SYSTEM
The dust ejection system prevents dust pile-up around the guard and
motor inlet, and minimized the amount of dust entering the motor
housing.
Accessories
It is important to choose the correct guards, backing pads and
flanges to use with grinder accessories. NOTE: Please refer to the
Grinding and Cutting Accessory Chart at the end of this section
to show other accessories that can be used with these grinders.
WARNING: Accessories must be rated for at least the speed
recom mended on the tool warning label. Wheels and other accessories
running over their rated accessory speed may fly apart and cause
injury. Threaded accessories must have a 5/8"-11 or M-14 hub. If it
does not, it may have been designed for a circular saw. Use only the
A
accessories shown on the Grinding and Cutting Accessory Chart
at the end of this section. Accessory ratings must always be above
D
tool speed as shown on tool nameplate.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and
removing accessories, before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: Never use the tool without the guard in place.
Mounting and Removing the Guard
(Fig. 2A, 2B)
WARNING: To reduce the risk of injury, turn unit off and
disconnect tool from power source before installing and
removing accessories, before making any adjustments or
removing/installing attachments or accessories. An accidental
start-up can cause injury.
When using the D28111 or the D28112 grinder for cutting metal or
masonry a Type 1 guard MUST be used. Type 1 guards are available
at extra cost from D
23
WALT distributors.
E