Radiator Coolant Level - Polaris Ranger 4X4 Owner's Manual

MAINTENANCE
Cooling System

Radiator Coolant Level

Always check and clean the screen and radiator fins at the intervals out-
lined in the Periodic Maintenance Chart beginning on page 50. Do not
obstruct or deflect air flow through the radiator by installing unautho-
rized accessories in front of the radiator or behind the cooling fan. Inter-
ference with the radiator air flow can lead to overheating and
consequentially, engine damage.
1. Lift the hood.
CAUTION! Escaping steam can cause
burns. Never remove the pressure cap
while the engine is warm or hot. Always
allow the engine to cool before removing
the pressure cap.
2. Slowly remove the radiator cap.
3. View the coolant level through
the opening.
4. Use a funnel and slowly add
coolant as needed.
Tip: This procedure is required only if
the cooling system has been
drained for maintenance and/or repair. But if the overflow bottle has run dry,
the level in the radiator should also be inspected.
5. Reinstall the pressure cap. Use of a non-standard pressure cap will
not allow the recovery system to function properly. See your dealer
for the correct replacement part.
68