Polaris Ranger 4X4 Owner's Manual page 110

Maintenance and safety
Hide thumbs Also See for Ranger 4X4:
Table of Contents

Advertisement

TROUBLESHOOTING
Engine Stops or Loses Power
Possible Cause
Out of fuel
Kinked or plugged fuel vent line
Water is present in fuel
Fouled or defective spark plugs
Worn or defective spark plug wires
Incorrect spark plug gap or heat range
Loose ignition connections
Low battery voltage
Incorrect fuel
Clogged air filter
Other mechanical failure
Overheated engine
106
Solution
Refuel
Inspect and replace
Replace with new fuel
Inspect, clean and/or replace spark plug
See your dealer
Set gap to specs or replace plug
Check all connections and tighten
Recharge the battery to 12.8 VDC
Replace with fresh recommended fuel
Inspect and clean or replace
See your dealer
Clean radiator screen and core, clean
engine exterior, see your dealer

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 ranger 4x4

Table of Contents