Dhcp Clients List - 3Com WL-602 User Manual

DHCP Clients List

Downloaded from www.Manualslib.com
1 Enter the Router's IP Address and Subnet Mask in the appropriate fields.
The default IP address is 192.168.1.1.
2 If you want to use the Router as a DHCP Server, check Enable in the DHCP
Server field.
3 Enter the IP address range in the IP Pool Start Address and IP Pool End
Address fields.
4 Specify the DHCP Lease time by selecting the required value from the
Lease Time drop-down menu. The lease time is the length of time the
DHCP server will reserve the IP address for each computer.
5 Specify the Local Domain Name for your network (this step is optional).
6 Enter the IP address of the NBX Call Processor in the 3Com NBX Call
Processor field (this step is optional).
7 Check all of your settings, and then click Apply.
The DHCP Clients List provides details on the devices that have received IP
addresses from the Router. The list is only created when the Router is set
up as a DHCP server. A maximum of 253 clients can be connected to the
Router.
Figure 38 DHCP Clients List Screen
For each device that is connected to the LAN, the following information is
displayed:
IP address — The Internet Protocol (IP) address issued to the client
■
machine.
manuals search engine
LAN Settings 53