How To Initialize The Lcd Tv/Dvd - Emerson LD195EM8 Service Manual

HOW TO INITIALIZE THE LCD TV/DVD

To put the program back at the factory-default, initialize the LCD TV/DVD using the following procedure.
< DVD Section >
1. Press [1], [2], [3], [4], and [DISPLAY] buttons on the
remote control unit in that order.
Fig. g appears on the screen.
" ******* " differs depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : CLEAR
Fig. g
2. Press [CLEAR] button on the remote control unit.
Fig. h appears on the screen.
" ******* " differs depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
Fig. h
When "OK" appears on the screen, the factory
default will be set.
3. To exit this mode, press [CH. o / p] button to go to
TV mode, or press [POWER] button to turn the
power off.
EXIT: SELECT
EXIT: SELECT
7-1
< LCD TV Section >
1. Turn the power on.
2. To enter the service mode, press the service
button on the service remote control unit. (Refer to
page 6-1.)
- To cancel the service mode, press [POWER]
button on the service remote control unit.
3. Press [DISPLAY] button on the service remote
control unit to initialize the LCD television.
4. "FF" will appear in the upper left of the screen.
"FF" color will change to red from white when
initialzing is complete.
A84N0INT