Table of Contents
Advertisement
Antenna Level
Confirms the present antenna level.
π †
è
π †
è
Note:
• If you are watching an analog channel or a signal from your i.LINK device, antenna level will
not appear.
Digital Sound
You can select the optical digital sound output, either PCM or Dolby Digital when your TV is
connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can
enjoy listening in 5.1ch sound when watching digital broadcasts.
π †
è
π †
è
Notes:
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it
cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 20.
Aspect Ratio
You can select the aspect mode for ATSC from 4:3 or 16:9.
π †
è
π †
è
Notes:
• Set the mode to 4:3 or 16:9 before you record a program using the ATSC MONITOR OUT.
• Make sure the mode you choose is the same as the TV's aspect ratio when the recorded
program is played back, so that you can obtain a good picture quality, free from any unatural
distortions.
Downloaded from
www.Manualslib.com
Press the M
button
ENU
To DIGITAL SETUP
To enter
To Antenna Level
To enter
Press the M
button
ENU
To DIGITAL SETUP
To enter
To Digital Sound
To select PCM or DOLBY DIGITAL
Press the M
button when finished
ENU
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
Press the M
button
ENU
To DIGITAL SETUP
To enter
To Aspect Ratio
To select 4:3 or 16:9
Press the M
button when finished
ENU
manuals search engine
Onscreen Menus
Antenna Level
75
BACK
Back
MENU
Exit
57
Hide quick links:
Advertisement
Table of Contents
