Connecting To An External Amplifier - JVC HD-56FH97 User Manual

Connecting to the Surround Amplifier
(HD-56FH97, HD-61FH97, HD-70FH97, HD-56FN97, HD-61FN97, HD-70FN97 ONLY)
In multi-channel sound such as 5.1 channel, the speech characters are played back from the
center speaker. A center speaker in a movie theater is set in back of the screen so it can
recreate a conversation scene in the movie more naturally. By using your TV's speaker as
the center speaker, you can obtain the same sound effect as in a movie theater in you home
theater sound system.
1) Connect the Pin cable from the TV's CENTER CHANNEL INPUT terminal to the surround
amplifier's CENTER CHANNEL OUTPUT terminal.
Note:
• Please read the benefit of this feature on page 56.

Connecting to an External Amplifier

1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the
LEFT AUDIO INPUT on the amplifier.
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the
RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier's manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
• You can not output audio using the AUDIO OUTPUT under the following conditions:
1) When you have digital sound from an HDMI device connected to the HDMI 1 or HDMI 2
connection on the back of your TV. (See page 22).
2) When you have analog sound from a DVI device connected to the AUDIO IN "HDMI 1"
connection. (See page 21).
Downloaded from www.Manualslib.com
TV Rear Panel
CENTER CHANNEL INPUT
S-VIDEO
VIDEO R
R
MONITOR
AUDIO
/REC OUT
OUTPUT
TV Rear Panel
manuals search engine
Front Front Surround
CENTER CHANNEL OUTPUT
(VARIABLE OUTPUT)
L
Speaker
L
Amplifier
Quick Setup
Speaker
19