Operation - Echo CS-800P Instruction Manual

Chain saw
Hide thumbs Also See for CS-800P:
Table of Contents

Advertisement

Cap indication
Oil/fuel tanks are indicated by the following
illustrations on the caps.
Oil tank cap
Start / Run
Choke
Starter handle
Unlock chain brake
CS-800P
Fuel tank cap

OPERATION

Chain brake
Ignition switch
Choke control knob
CHAIN LUBRICANT
Proper lubrication of the chain while in operation
reduces the friction between the chain and the
guide bar to a minimum and assures a longer
service life.
purpose.
oiler problems.
Use motor oil, etc.
SAE No. 30 ....... in summer
SAE No. 10 ....... in winter or when cutting
• After choke control knob is pulled and then
knob is returned to original position, throttle
remains a little open (latch condition).
• If engine is started in this latch condition,
chain starts to turn. Do not start engine
before chain brake is activated.
• After starting the engine, immediately
squeeze and release throttle trigger for
disengaging throttle latch and returning
engine to idle, and pull front hand guard
towards the operator immediately.
(Chain brake unlocked position)
• Never use throttle latch for cutting.
• Use the chain brake only in starting or in
emergencies.
14
resinous trees
WARNING
CAUTION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents