Table of Contents
Advertisement
Note:
To change the region code please follow the steps below:
1) Insert disc
2) Press "stop" key on the remote controller, it will display "STOP" on the LCD.
3) Long press "AP" key on the front panel, it will display "REG SET" on the LCD.
4) Press "eject" key on the back of the front panel, open and remove the disc
5) Press TITLE key, then input "0" four times "0000".
6) It will display two lines of words on the screen shown as below:
Region EDIT:_
Region CODE:0
The first line is the regional code you will set.
The second line is the regional code has been set.
"0" means the sample can read all the regional DVD discs
7) Input one of the numeric keys :0, 1, 2, 3, 4, 5, 6 that will be set as the regional code.
8) Press "ENTER" key, the operation is finished.
33
Advertisement
Table of Contents
