Table of Contents
Advertisement
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.7 Paper Loading
1.7.1 Pin-feed paper
Pin-feed paper is defined as fanfold paper or business form paper with sprocket
holes for paper feed on both sides.
The FX-80 accommodates pin-feed paper from 9.5" to 10" in width. (4.0" to 9.0"
when the optional tractor unit is used.)
To load the pin-feed paper, observe the following procedure.
1. Remove the printer cover.
2. Turn the scale toward the front of the printer to detach it from the platen.
Sprocket lock lever
Insertion of Fanfold Paper
3. Unlock the release lever.
4. Pull the head adjusting lever forward (in the @ direction) as far as it will go.
5. Fold the pin-feed paper in half to prevent it from wrinkling.
6. Push the leading edge of the paper into the insertion slot between the paper
guides at the rear part of the printer mechanism.
7. Raise the two sprocket lock levers to loosen, and adjust the sprocket pin
position slightly wider than the width of the paper.
The scale inscribed; 9.5" and 10" on the frame can be used as a guide to adjust
the sprocket pin position to the paper width.
8. Lock the two sprocket levers.
1-7
Advertisement
Table of Contents
