Epson FX-BO Operation Manual page 130

ESC L
-
-
ESC L
-
'M.. "g
ESC L - Dual-density bit image (2-pin)
m.lig¥1i.hi
CHR$(27);IL";CHR$(n,);CHR$(n2);CHR$(m); ...
-
MilUm
It""
This code sets the Dual-density bit image mode. The dot pattern
indicated by nl and nz following ESC L will be printed in dual
density.
Refer to the description of ESC K code for detailed information as to
how to obtain the values of nl and nz.
The transfer sequence of bit image data is the same as with the ESC K
(normal-density bit image printing), but bit image printing can be
performed in twice the dot density in the horizontal direction as with
the ESC K. In other words, bit image data can be printed in
960
dot
positions per line, thus permitting to produce denser graphic data.
If data exceeding this amount is specified, the excess will be ignored.
-
After the completion of the bit image printing, the printer will
automatically return to Text mode.
-
Mixing of normal-density bit image with dual-density bit image 0n a
line is at your option, as well as mixing with the characters in Text
mode.
- Gig.lm
ESC K
-
-
-
-
-
3-81