Too Much Noise In Washing - Haier HLT20E Service Manual

No spinning
Insert the plug and select draining function
Check if the ratchet wheel of the gear
case is at the spot.
Replace the gear case.
Too much noise in spinning
If the washing machine is set horizontally.
If the hanger is wrongly used.
If the noise of the motor is too much.
If the motor is fastened tightly.
If the noise of the gear case is large.

Too much noise in washing

If the pulsator is rubbing the
bottom of the inner tub.
If the noise of the motor is too much.
If the motor fastened tightly.
If the noise of the gear case is too large.
If the belt is too tight or loose.
If the radiating pulley is loose.
MAINTENANCE SERVICE AND TROUBLE SHOOTING
Yes
At the same time please turn the sequence to
every spin location to examine, if three os one
place spinning ,replace the sequence.
Yes
No
No
Yes
No Replace the drain motor
No
Set the machine horizontally.
Yes
Replace the hanger.
Yes
Replace the motor.
No
Fasten the motor.
No
Replace the gear gas
Adjust the gap between the
Yes
pulsator and inner tub
Yes
Replace the motor.
No
Fasten the motor.
No
Replace the retarder.
Yes
Adjust the belt.
Yes
Fasten the radiating pulley.
12