Table of Contents
Advertisement
Remote
Controller-Continued
@
Previous and Next [....
]1[..-]
buttons
These buttons are used to select the previous or next
track on an HDD component. Pressing them
repeatedly selects earlier or later tracks. On a
cassette deck, they're used for rewind and fast
forward.
@
Reverse and Fast Forward [...
]I[~
]
buttons
These buttons are used for reverse and fast forward
on an HDD component.
@
DECK AlHDD (DOCK) buttons
Pause [II]/Reverse Play
[~]:
Suspends playback
on an HDD component; starts reverse playback on a
cassette deck.
Play
[~]:
Starts playback on an HDD or cassette
component.
Stop [.]: Stops playback on an HDD or cassette
component.
@
DECK B buttons
On twin cassette decks, only deck B can be
controlled.
Play
[~]:
Starts playback.
Stop [.]: Stops playback.
Reverse Play
[~]:
Starts reverse playback.
@
MUTING button (21)
Mutes or unmutes the receiver.
@
VOLUME
[.]I[T]
buttons (20)
Adjusts the volume of the receiver regardless of the
currently selected remote controller mode.
Point the remote controller toward the remote control
sensor.
Remote control sensor
Notes:
• The remote controller may not work reliably if the
receiver is subjected to bright light, such as direct
sunlight or inverter-type fluorescent lights. Keep this
in mind when installing.
• If another remote controller of the same type is used
in the same room, or the receiver is installed close to
equipment that uses infrared rays, the remote
controller may not work reliably.
• Don't put anything, such as a book, on the remote
controller, because the buttons may be pressed
inadvertently, thereby draining the batteries.
• The remote controller may not work reliably if the
receiver is installed in a rack behind colored glass
doors. Keep this in mind when installing.
The remote controller will not work if there's an obstacle
between it and the receiver's remote control sensor.
11
Advertisement
Table of Contents
